Differential Hall-Effect Sensors | Speed Sensors | Products https://braun-tacho.de/category/hall-effect-sensors/ Protection Systems | Speed monitoring | Overspeed Protection Wed, 03 Dec 2025 16:52:10 +0000 en-US hourly 1 A5S0DD0 https://braun-tacho.de/a5s0dd0/ Wed, 29 Jul 2015 08:44:21 +0000 http://redesign.braun-tacho.de/?p=5418 Sensor A5S0DD0 for detection of rotational speed

Contact-free, wear-free, maintenance-free
Unsusceptible versus external magnetic stray fields and machine vibration
Suitable for all applications where high levels of accuracy and reliability are at a premium
Frequency range 0 Hz...25 kHz
Single Channel,
the output displays the rotational speed as a single-track frequency signal
TÜV certified for safety level SIL3 / IEC 61508:2010
TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
TÜV certified for SILCL3 / IEC 62061:2015

Details

The post A5S0DD0 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]>
A5S0 Differential-Hall-Effect Speed Sensors. A5S0DD0, A5S0DS0, A5S0DD3, A5S0DS3, A5S0DD4, A5S0DS4.

A5S0DD0

Sensor A5S0DD0 for detection of rotational speed and highest safety requirements up to SIL3

The BRAUN Speed Sensors Series A5S0 are TÜV certified for SIL3 acc. IEC 61508:2010 and therefore meet the high SIL3 standards.

The correct choice of sensor is always a prerequisite to achieving a successful solution. Therefore, BRAUN A5S0 sensors base on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. They are contact-free, wear-free, maintenance-free, and unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S0 sensors especially suited for all applications where high accuracy and reliability are at a premium.
In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.

Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics.
The stainless steel sensor housing is sealed at the front and is pressure-resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.

Key Features

  • SIL3/IEC 61508:2010 certified by TÜV
  • Detection of rotational speed in non-hazardous areas
  • Speed range from 0 Hz to 25 kHz
  • Single Channel,
    the output displays the rotational speed as a single-track frequency signal
  • Air gap to the target/pole wheel up to 2.5 mm (depending on the profile size)
  • Temperature range -40…+125 °C (-40…+255 °F)
  • Differential principle diminishes the influence of external magnetic stray fields and machine vibration
  • Sealed stainless steel enclosure > 200 bar pressure to the sensor tip
  • Available for connection via tight plug, or with fixed Teflon® cable
  • Powerful square wave output signal equally high over the entire speed range
  • Sensor short circuit proof and protected versus polarity error
  • Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material

Benefits

  • Contact-free with a large air gap, so the potential for damage is eliminated
  • Wear-free due to its unique design principle
  • Maintenance-free during Lifetime, therefore minimized TCO
  • Unsusceptible versus external magnetic stray fields and machine vibration
  • Operates down to zero speed
  • Cannot be damaged by faulty wiring
  • Almost every target profile can be used
  • A5S0 sensors do not influence each other; no mounting distance in between is required

Product Brochures

Title Language File type
A5S Overview Brochure English PDF
A5S0DD0 Product Brochure English PDF

Technical Manuals

Title Language File type
A5S0DD0 Manual English PDF
A5S0DD0 Manual PDF

Product Certificates & Declarations of Conformity

Document type Language Scope File type
EU Declaration of Conformity English German European Union PDF
UK Declaration of Conformity English German United Kingdom PDF
SIL3 Certificate English Worldwide PDF
SIL3 Certificate Worldwide PDF
UL/CSA Approval English USA/Canada PDF
back

The post A5S0DD0 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]> A5S0DD3 https://braun-tacho.de/a5s0dd3/ Wed, 29 Jul 2015 08:45:01 +0000 http://redesign.braun-tacho.de/?p=5420 Sensor A5S0DD3 for detection of rotational speed and direction of rotation

Contact-free, wear-free, maintenance-free
Unsusceptible versus external magnetic stray fields and machine vibration
Suitable for all applications where high levels of accuracy and reliability are at a premium
Frequency range 0 Hz...25 kHz
Dual Channel,
1 track = rotational speed as frequency, 1 track = F/R status as binary signal
TÜV certified for safety level SIL3 / IEC 61508:2010
TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
TÜV certified for SILCL3 / IEC 62061:2015

Details

The post A5S0DD3 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]>
A5S0 Differential-Hall-Effect Speed Sensors. A5S0DD0, A5S0DS0, A5S0DD3, A5S0DS3, A5S0DD4, A5S0DS4.

A5S0DD3

Sensor A5S0DD3 for detection of rotational speed and direction of rotation
and highest safety requirements up to SIL3

The BRAUN Speed Sensors Series A5S0 are TÜV certified for SIL3 acc. IEC 61508:2010 and therefore meet the high SIL3 standards.

The correct choice of sensor is always a prerequisite to achieving a successful solution. Therefore BRAUN A5S0 sensors base on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. They are contact-free, wear-free, maintenance-free, and unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S0 sensors especially suited for all applications where high accuracy and reliability are at a premium.
In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.

Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics.
The stainless steel sensor housing is sealed at the front and is pressure-resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.

Key Features

  • SIL3/IEC 61508:2010 certified by TÜV
  • Detection of rotational speed and direction of rotation in non-hazardous areas
  • Speed range from 0 Hz to 25 kHz
  • Dual Channel,
    1 track = rotational speed as frequency, 1 track = F/R status as binary signal
  • Air gap to the target/pole wheel up to 2.5 mm (depending on the profile size)
  • Temperature range -40…+125 °C (-40…+255 °F)
  • Differential principle diminishes the influence of external magnetic stray fields and machine vibration
  • Sealed stainless steel enclosure > 200 bar pressure to the sensor tip
  • Available for connection via tight plug, or with fixed Teflon® cable
  • Powerful square wave output signal equally high over the entire speed range
  • Sensor short circuit proof and protected versus polarity error
  • Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material

Benefits

  • Contact-free with a large air gap, so the potential for damage is eliminated
  • Wear-free due to its unique design principle
  • Maintenance-free during Lifetime, therefore minimized TCO
  • Unsusceptible versus external magnetic stray fields and machine vibration
  • Operates down to zero speed
  • Cannot be damaged by faulty wiring
  • Almost every target profile can be used
  • A5S0 sensors do not influence each other; no mounting distance in between is required

Product Brochures

Title Language File type
A5S Overview Brochure English PDF
A5S0DD3 Product Brochure English PDF

Technical Manuals

Title Language File type
A5S0DD3 Manual English PDF
A5S0DD3 Manual PDF

Product Certificates & Declarations of Conformity

Document type Language Scope File type
EU Declaration of Conformity English German European Union PDF
UK Declaration of Conformity English German United Kingdom PDF
SIL3 Certificate English Worldwide PDF
SIL3 Certificate Worldwide PDF
UL/CSA Approval English USA/Canada PDF
back

The post A5S0DD3 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]> A5S0DD4 https://braun-tacho.de/a5s0dd4/ Wed, 29 Jul 2015 08:45:35 +0000 http://redesign.braun-tacho.de/?p=5422 Sensor A5S0DD4 for detection of rotational speed and direction of rotation with two phase-shifted speed signals

Contact-free, wear-free, maintenance-free
Unsusceptible versus external magnetic stray fields and machine vibration
Suitable for all applications where high levels of accuracy and reliability are at a premium
Frequency range 0 Hz...25 kHz
Dual Channel,
the output displays the rotational speed as a twin-track frequency signal (phase-shifted)
Suitable for external direction detection with enhanced safety
TÜV certified for safety level SIL3 / IEC 61508:2010
TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
TÜV certified for SILCL3 / IEC 62061:2015

Details

The post A5S0DD4 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]>
A5S0 Differential-Hall-Effect Speed Sensors. A5S0DD0, A5S0DS0, A5S0DD3, A5S0DS3, A5S0DD4, A5S0DS4.

A5S0DD4

Sensor A5S0DD4 for detection of rotational speed and direction of rotation with two phase-shifted speed signals and highest safety requirements up to SIL3

The BRAUN Speed Sensors Series A5S0 are TÜV certified for SIL3 acc. IEC 61508:2010 and therefore meet the high SIL3 standards.

The correct choice of sensor is always a prerequisite to achieving a successful solution. Therefore BRAUN A5S0 sensors base on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. They are contact-free, wear-free, maintenance-free, and unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S0 sensors especially suited for all applications where high accuracy and reliability are at a premium.
In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.

Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics.
The stainless steel sensor housing is sealed at the front and is pressure-resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.

Key Features

  • SIL3/IEC 61508:2010 certified by TÜV
  • Detection of rotational speed and direction of rotation with two phase-shifted speed signals in non-hazardous areas
  • Speed range from 0 Hz to 25 kHz
  • Dual Channel,
    the output displays the rotational speed as a twin-track frequency signal (phase-shifted)
  • Suitable for external direction detection with enhanced safety
  • Air gap to the target/pole wheel up to 2.5 mm (depending on the profile size)
  • Temperature range -40…+125 °C (-40…+255 °F)
  • Differential principle diminishes the influence of external magnetic stray fields and machine vibration
  • Sealed stainless steel enclosure > 200 bar pressure to the sensor tip
  • Available for connection via tight plug, or with fixed Teflon® cable
  • Powerful square wave output signal equally high over the entire speed range
  • Sensor short circuit proof and protected versus polarity error
  • Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material

Benefits

  • Contact-free with a large air gap, so the potential for damage is eliminated
  • Wear-free due to its unique design principle
  • Maintenance-free during Lifetime, therefore minimized TCO
  • Unsusceptible versus external magnetic stray fields and machine vibration
  • Operates down to zero speed
  • Cannot be damaged by faulty wiring
  • Almost every target profile can be used
  • A5S0 sensors do not influence each other; no mounting distance in between is required

Product Brochures

Title Language File type
A5S Overview Brochure English PDF
A5S0DD4 Product Brochure English PDF

Technical Manuals

Title Language File type
A5S0DD4 Manual English PDF
A5S0DD4 Manual PDF

Product Certificates & Declarations of Conformity

Document type Language Scope File type
EU Declaration of Conformity English German European Union PDF
UK Declaration of Conformity English German United Kingdom PDF
SIL3 Certificate English Worldwide PDF
SIL3 Certificate Worldwide PDF
UL/CSA Approval English USA/Canada PDF
back

The post A5S0DD4 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]> A5S0DS0 https://braun-tacho.de/a5s0ds0/ Wed, 29 Jul 2015 08:46:28 +0000 http://redesign.braun-tacho.de/?p=5424 Sensor A5S0DS0 for detection of rotational speed

Contact-free, wear-free, maintenance-free
Unsusceptible versus external magnetic stray fields and machine vibration
Suitable for all applications where high levels of accuracy and reliability are at a premium
Frequency range 0 Hz...12 kHz
Single Channel,
the output displays the rotational speed as a single-track frequency signal
TÜV certified for safety level SIL3 / IEC 61508:2010
TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
TÜV certified for SILCL3 / IEC 62061:2015

Details

The post A5S0DS0 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]>
A5S0 Differential-Hall-Effect Speed Sensors. A5S0DD0, A5S0DS0, A5S0DD3, A5S0DS3, A5S0DD4, A5S0DS4.

A5S0DS0

Sensor A5S0DS0 for detection of rotational speed and highest safety requirements up to SIL3

The BRAUN Speed Sensors Series A5S0 are TÜV certified for SIL3 acc. IEC 61508:2010 and therefore meet the high SIL3 standards.

The correct choice of sensor is always a prerequisite to achieving a successful solution. Therefore BRAUN A5S0 sensors base on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. They are contact-free, wear-free, maintenance-free, and unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S0 sensors especially suited for all applications where high accuracy and reliability are at a premium.
In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.

Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics.
The stainless steel sensor housing is sealed at the front and is pressure-resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.

Key Features

  • SIL3/IEC 61508:2010 certified by TÜV
  • Detection of rotational speed in non-hazardous areas
  • Speed range from 0 Hz to 12 kHz
  • Single Channel,
    the output displays the rotational speed as a single-track frequency signal
  • Air gap to the target/pole wheel up to 2.5 mm (depending on the profile size)
  • Temperature range -40…+125 °C (-40…+255 °F)
  • Differential principle diminishes the influence of external magnetic stray fields and machine vibration
  • Sealed stainless steel enclosure > 200 bar pressure to the sensor tip
  • Available for connection via tight plug, or with fixed Teflon® cable
  • Powerful square wave output signal equally high over the entire speed range
  • Sensor short circuit proof and protected versus polarity error
  • Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material

Benefits

  • Contact-free with a large air gap, so the potential for damage is eliminated
  • Wear-free due to its unique design principle
  • Maintenance-free during Lifetime, therefore minimized TCO
  • Unsusceptible versus external magnetic stray fields and machine vibration
  • Operates down to zero speed
  • Cannot be damaged by faulty wiring
  • Almost every target profile can be used
  • A5S0 sensors do not influence each other; no mounting distance in between is required

Product Brochures

Title Language File type
A5S Overview Brochure English PDF
A5S0DS0 Product Brochure English PDF

Technical Manuals

Title Language File type
A5S0DS0 Manual English PDF
A5S0DS0 Manual PDF

Product Certificates & Declarations of Conformity

Document type Language Scope File type
EU Declaration of Conformity English German European Union PDF
UK Declaration of Conformity English German United Kingdom PDF
SIL3 Certificate English Worldwide PDF
SIL3 Certificate Worldwide PDF
UL/CSA Approval English USA/Canada PDF
back

The post A5S0DS0 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]> A5S0DS3 https://braun-tacho.de/a5s0ds3/ Wed, 29 Jul 2015 09:47:05 +0000 http://redesign.braun-tacho.de/?p=5426 Sensor A5S0DS3 for detection of rotational speed and direction of rotation

Contact-free, wear-free, maintenance-free
Unsusceptible versus external magnetic stray fields and machine vibration
Suitable for all applications where high levels of accuracy and reliability are at a premium
Frequency range 0 Hz...12 kHz
Dual Channel,
1 track = rotational speed as frequency, 1 track = F/R status as binary signal
TÜV certified for safety level SIL3 / IEC 61508:2010
TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
TÜV certified for SILCL3 / IEC 62061:2015

Details

The post A5S0DS3 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]>
A5S0 Differential-Hall-Effect Speed Sensors. A5S0DD0, A5S0DS0, A5S0DD3, A5S0DS3, A5S0DD4, A5S0DS4.

A5S0DS3

Sensor A5S0DS3 for detection of rotational speed and direction of rotation
and highest safety requirements up to SIL3

The BRAUN Speed Sensors Series A5S0 are TÜV certified for SIL3 acc. IEC 61508:2010 and therefore meet the high SIL3 standards.

The correct choice of sensor is always a prerequisite to achieving a successful solution. Therefore BRAUN A5S0 sensors base on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. They are contact-free, wear-free, maintenance-free, and unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S0 sensors especially suited for all applications where high accuracy and reliability are at a premium.
In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.

Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics.
The stainless steel sensor housing is sealed at the front and is pressure-resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.

Key Features

  • SIL3/IEC 61508:2010 certified by TÜV
  • Detection of rotational speed and direction of rotation in non-hazardous areas
  • Speed range from 0 Hz to 12 kHz
  • Dual Channel,
    1 track = rotational speed as frequency, 1 track = F/R status as binary signal
  • Air gap to the target/pole wheel up to 2.5 mm (depending on the profile size)
  • Temperature range -40…+125 °C (-40…+255 °F)
  • Differential principle diminishes the influence of external magnetic stray fields and machine vibration
  • Sealed stainless steel enclosure > 200 bar pressure to the sensor tip
  • Available for connection via tight plug, or with fixed Teflon® cable
  • Powerful square wave output signal equally high over the entire speed range
  • Sensor short circuit proof and protected versus polarity error
  • Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material

Benefits

  • Contact-free with a large air gap, so the potential for damage is eliminated
  • Wear-free due to its unique design principle
  • Maintenance-free during Lifetime, therefore minimized TCO
  • Unsusceptible versus external magnetic stray fields and machine vibration
  • Operates down to zero speed
  • Cannot be damaged by faulty wiring
  • Almost every target profile can be used
  • A5S0 sensors do not influence each other; no mounting distance in between is required

Product Brochures

Title Language File type
A5S Overview Brochure English PDF
A5S0DS3 Product Brochure English PDF

Technical Manuals

Title Language File type
A5S0DS3 Manual English PDF
A5S0DS3 Manual PDF

Product Certificates & Declarations of Conformity

Document type Language Scope File type
EU Declaration of Conformity English German European Union PDF
UK Declaration of Conformity English German United Kingdom PDF
SIL3 Certificate English Worldwide PDF
SIL3 Certificate Worldwide PDF
UL/CSA Approval English USA/Canada PDF
back

The post A5S0DS3 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]> A5S0DS4 https://braun-tacho.de/a5s0ds4/ Wed, 29 Jul 2015 08:47:22 +0000 http://redesign.braun-tacho.de/?p=5428 Sensor A5S0DS4 for detection of rotational speed and direction of rotation with two phase-shifted speed signals

Contact-free, wear-free, maintenance-free
Unsusceptible versus external magnetic stray fields and machine vibration
Suitable for all applications where high levels of accuracy and reliability are at a premium
Frequency range 0 Hz...12 kHz
Dual Channel,
the output displays the rotational speed as a twin-track frequency signal (phase-shifted)
Suitable for external direction detection with enhanced safety
TÜV certified for safety level SIL3 / IEC 61508:2010
TÜV certified for PL e; Cat. 3 / DIN EN ISO 13849-1:2016 + DIN EN ISO 13849-2:2012
TÜV certified for SILCL3 / IEC 62061:2015

Details

The post A5S0DS4 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]>
A5S0 Differential-Hall-Effect Speed Sensors. A5S0DD0, A5S0DS0, A5S0DD3, A5S0DS3, A5S0DD4, A5S0DS4.

A5S0DS4

Sensor A5S0DS4 for detection of rotational speed and direction of rotation with two phase-shifted speed signals and highest safety requirements up to SIL3

The BRAUN Speed Sensors Series A5S0 are TÜV certified for SIL3 acc. IEC 61508:2010 and therefore meet the high SIL3 standards.

The correct choice of sensor is always a prerequisite to achieving a successful solution. Therefore BRAUN A5S0 sensors base on the proven Differential-Hall-Effect principle. Their low end of 0 Hz allows monitoring the machine down to zero speed. They are contact-free, wear-free, maintenance-free, and unsusceptible versus external magnetic stray fields and machine vibration. These characteristics make the series of A5S0 sensors especially suited for all applications where high accuracy and reliability are at a premium.
In contrast, other sensors like magnet-inductive or static Hall-sensors do not meet these demands.

Each sensor in the series is available in various lengths and diameters and comes with a choice of connections. However, functionally all sensors have the same characteristics.
The stainless steel sensor housing is sealed at the front and is pressure-resistant (>200bar). A flat shaft is available or with a screw-in thread M12x1, M14x1, M14x1,5, M16x1, M16x1,5, M18x1, M18x1,5, M22x1, 5/8-18UNF-2A. Customized dimensions and thread specifications are possible.

Key Features

  • SIL3/IEC 61508:2010 certified by TÜV
  • Detection of rotational speed and direction of rotation with two phase-shifted speed signals in non-hazardous areas
  • Speed range from 0 Hz to 12 kHz
  • Dual Channel,
    the output displays the rotational speed as a twin-track frequency signal (phase-shifted)
  • Suitable for external direction detection with enhanced safety
  • Air gap to the target/pole wheel up to 2.5 mm (depending on the profile size)
  • Temperature range -40…+125 °C (-40…+255 °F)
  • Differential principle diminishes the influence of external magnetic stray fields and machine vibration
  • Sealed stainless steel enclosure > 200 bar pressure to the sensor tip
  • Available for connection via tight plug, or with fixed Teflon® cable
  • Powerful square wave output signal equally high over the entire speed range
  • Sensor short circuit proof and protected versus polarity error
  • Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material

Benefits

  • Contact-free with a large air gap, so the potential for damage is eliminated
  • Wear-free due to its unique design principle
  • Maintenance-free during Lifetime, therefore minimized TCO
  • Unsusceptible versus external magnetic stray fields and machine vibration
  • Operates down to zero speed
  • Cannot be damaged by faulty wiring
  • Almost every target profile can be used
  • A5S0 sensors do not influence each other; no mounting distance in between is required

Product Brochures

Title Language File type
A5S Overview Brochure English PDF
A5S0DS4 Product Brochure English PDF

Technical Manuals

Title Language File type
A5S0DS4 Manual English PDF
A5S0DS4 Manual PDF

Product Certificates & Declarations of Conformity

Document type Language Scope File type
EU Declaration of Conformity English German European Union PDF
UK Declaration of Conformity English German United Kingdom PDF
SIL3 Certificate English Worldwide PDF
SIL3 Certificate Worldwide PDF
UL/CSA Approval English USA/Canada PDF
back

The post A5S0DS4 appeared first on BRAUN GmbH Industrie-Elektronik | Protection Systems.

]]>